Why a running toilet matters
A toilet that keeps running is easy to ignore, but it can waste a large amount of water every day and quietly push up your water bill. The good news: most running toilets are caused by a few inexpensive parts inside the tank.
1. A worn or warped flapper
The rubber flapper at the bottom of the tank seals water in until you flush. Over time chlorine and minerals harden it, and water slowly leaks into the bowl. The tank refills, leaks again, and the cycle repeats. Add a few drops of food coloring to the tank - if color shows up in the bowl within 15 minutes without flushing, the flapper is leaking.
2. Float set too high
If the float lets the water rise above the overflow tube, water spills into the tube constantly. Lowering the float a little usually fixes it.
3. A failing fill valve
A fill valve that hisses, refills on its own or never fully shuts off needs replacement. This is one of the most common fixes during a toilet repair visit.
4. A tangled or short chain
If the flapper chain is too short or catches under the flapper, the seal never closes fully. Leave a little slack.
5. A cracked overflow tube or flush valve
Less common, but a cracked overflow tube or worn flush valve seat means rebuilding the tank or replacing the toilet.
When to call a plumber
If you have replaced the flapper and adjusted the float and the toilet still runs, or if you see water around the base, call a local plumber. A toilet overflowing is a different situation - shut off the valve behind the toilet and call our emergency plumbers right away.
Quick Answers
How much water does a running toilet waste?
It depends on the leak. A slow flapper leak wastes less than a fill valve that never shuts off, but either can add up to thousands of gallons over a few months.
Can a running toilet raise my water bill?
Yes. A running toilet is one of the most common causes of a sudden high water bill.